Unfilled Grades - 500S

The 500 series is an excellent option when good scratch resistance is asked for and when there are high surface finish requirements such as elongation, compression set, tensile and tear strength. The low density gives lower weight compared to the 600 and 660 series. Material in the 500 series is available in hardnesses from 7 Shore A to 55 Shore D.

Service temperature range UV and ozon resistance Weatherability Food contact¹ Adhesion to PP Specific Gravity Shrinkage Processing temp. Extrusion Processing temp. Injection mould

-50 - +125°C Excellent Excellent x Excellent 0,89 g/cm³ 0,8-2,0% 150 - 210°C 180 - 210°C

¹From 30 Shore A to 90 Shore A there are, in 5 Shore steps, types in translucent and black, that are in compliance with food regulations.

All the above information about chemical and physical properties consists of values measured in tests on injection moulded test specimens. We provide, written and illustrated advice in good faith. This should however only be regarded as being advisory, and does not absolve the customer from doing their own tests and trials, to determine the suitability of the material for the intended applications. We retain the right to make changes without prior notice.