Semi Filled Qualities - 660S

The 660 series is recommended when the properties of the produced detail requires the advantages of the 500 series in combination with the 600 series. A semi-filled material can therefore combine the advantages of the other two series. The material has good flow- and mechanical properties as well as reasonable scratch resistance.

Service temperature range UV and ozon resistance Weatherability Food contact¹ Adhesion to PP Specific Gravity Shrinkage Processing temp. Extrusion Processing temp. Injection mould

-50 - +125°C Excellent Excellent x Excellent 1,05 g/cm³ 0,8-2,0% 150 - 210°C 180 - 210°C

¹From 30 Shore A to 90 Shore A there are, in 5 Shore steps, types in translucent and black, that are in compliance with the food regulations.




All the above information about chemical and physical properties consists of values measured in tests on injection moulded test specimens. We provide, written and illustrated advice in good faith. This should however only be regarded as being advisory, and does not absolve the customer from doing their own tests and trials, to determine the suitability of the material for the intended applications. We retain the right to make changes without prior notice.